5. Rotate the emergency mechanical key to position 0. 6. Remove the emergency mechanical key from the ignition lock cylinder. The keyless vehicle module is now in passive key diagnosis mode. The module will remain in diagnosis mode for 30 seconds or until the ignition lock cylinder is rotated to position II. 1. Name: Aram. Ford Model: Focus. Ford Year: 2016. UK/Ireland Location: Other/NonUK. Posted January 18, 2020. Hello, The dealer told me that my Radio Frequency receiver.is damaged and asks $800 to change it. If I understand correctly it is in the roof, above the interior light.
Outputs from the GEM may be more susceptible to damage, either by short circuits to ground when the GEM is energising them, or by shorting to battery voltage. On the basic Focus, the electronic part of the GEM activates relays (one for the Drivers Door & Fuel Filler, one for the other door(s)), that supply 12v, via fuses, to the unlock motors
Hi there, I need to change the GEM (passenger compartment fuse box) coz it's got the rear wiper relay integrated within it. What numbers and/or letters have to match on the 2 units when buying a second hand unit from a breaker? Thanks

They checked three other Focus all newer models and they had the alarm in that place. The suggestion was I found another 06 Focus , set the alarm off and listen to where it is. My own thoughts are that the gem box is not set correctly but they wont have it. Can any one tell me where the siren is located . Thanks. Ant

Posted August 30, 2016. The software of the Focus MK2/MK2.5 GEM module can not be updated. There are several versions of the GEM module installed during production. Each part number supports different options. The GEM module should only be replaced by another one that supports the same (or more) options otherwise some functions may not work. As saZbBd. 992 468 674 508 115 697 831 104

ford focus mk2 gem module location